Click on the image to check the artwork
DMX Digital tube comes in a standard 1 meter length with 32 RGB LEDs,each 2-LED section addressable.It is larger in size than DMX bar fixtures and has a convex PC diffuser that joins clear and milky,fixed onto its aluminum substrate.There are two options concerning cable entry way.You can have either cable bottom entry or cable side entry. It conforms to DMX512 lighting protocol,very easy to work with in any DMX control system.This fixture is commonly used for architectural lighting projects,stages,shows,clubs,etc.
ARTNET/DMX
RGB color changing modes by any DMX devices.
WATERPROOF
It is applicable for outdoor environment with IP65.
SCREW MOUNTING BRACKETS
Each tube has two screw mounting brackets on the back of aluminum base.
| DMX Digital Tube | |||
| 3C-DT-8P | 3C-DT-16PM | 3C-DT-24P | |
| LED QTY | 16 pcs | 32 pcs | 48 pcs |
| Light Source | SMD 5050 | ||
| Beam Angle | 120° | ||
| Color | RGB | ||
| Voltage | DC12V | ||
| Wattage | 6W | 12W | 18W |
| Length | 0.5m | 1m | 1.5m |
| Length | 1.64' | 3.28' | 4.92' |
| IP Rating | IP65 | ||
| Diffuser | Clear, Milky | ||
| Material | Aluminum Housing | ||
| Channels | 24CH | 48CH | 72CH |
| Protocol | DMX512 | ||
| Controller | Standard DMX Interface | ||
| DMX Addressability | Self Address/Manually | ||
Similar Products：